Closed Corner Frame Sample 5429

Frame 5429 Description

Handcrafted from one of our newest and largest mouldings, this frame has been gaining popularity for those works of art that are truly special. Five inches wide, this frame's top rail, lip and ornaments are gilded in 22K gold. Burnished highlights, a yellow clay undercoat and very little rub-through gives the look of solid gold. In contrast, the back and panel of this frame are oil gilded in crushed brass, which creates a textured soft gold look. The entire frame is then whitewashed and lightly spattered to create a beautiful harmony of shine and softness. The corner ornaments on this frame are timeless and unusual. Perfect for your oversized piece, this frame has proven to be unique and breathtaking.

Frame 5429 Pricing

Frame 5429 Specifications

Moulding: CM-5
Width: 5"
Ornament (compo): 3447F
Corner: spline
Leaf: 22k gold & crushed brass
Rabbet Lip Width: 1/2"
Rabbet Depth: 1/2"

Click to view Larger Photo

How To Measure Your Artwork for Framing

Measure the length and height of the outer edge of your artwork, including mat if there is one.

Measure all four sides to make sure your artwork is square. If your artwork is not square, be sure to order a frame with a rabbet lip wide enough to cover the difference.

Enter your measurement in inches. For instance, if your frame measures 2'2" x 3'4", enter 26" x 40".

If you have any questions or concerns about your measurements, take your artwork to a professional framer to have it measured. Correct measurements are critical to building your frame. We are not responsible for frames which do not fit because the artwork was improperly measured

We will take the measurements provided by you, and cut the moulding's inside corners at the rabbet to these measurements.

We add a standard 1/8" allowance to each measurement for ease of mounting. For instance, if your order specifies 26" x 40", your frame will actually be cut at 26 1/8" x 40 1/8". Take this into consideration when measuring your frame. If you need your frame to be cut to an exact size with no allowance, be sure to indicate this by adding a note to your order.

How Frame Price is Calculated

Frames by Edward Wright pricing combines two charges:

The per foot charge applies to the work done to the entire surface of the frame, such as the finish or a carve along the length.
The corner charge applies to work that does not depend on the size of the frame, such as joining the corners or a carving in the corners only. Every frame has four corners, no matter what its size, so the corner charge for a particular sample is always the same regardless of size.

We add the per foot charge and the corner charge to determine the total cost of your frame, as follows:

(frame feet x per foot price) + corner price

What does frame feet mean? Frame feet is a precise calculation based on the following measurements:

height: provided by you, height of artwork
length: provided by you, height of artwork
moulding width: the thickness of the moulding which will be used to make your frame

The height and length, measured from your artwork, are the inner measurement of the frame. The outer measurement, or total frame feet, is calculated with this equation:

((Height + Length)*2 + MouldWidth*8)/12

How is the crating and shipping price calculated?

Crating and shipping prices are determined by size:

Frames with a total size of 11 feet and under are shipped via UPS, at a cost of $13 per foot.
Frames with a total size over 11 feet are shipped via Old Dominion, priced as follows:
- $19 per foot in the following states: Alabama, Arkansas, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Virginia (except Manassas)
- $21 per foot to all other states
Contact us for shipping costs outside the US